Characteristics
Home > Products > 120V/208V Products > UPS > Pulsar MX > Characteristics
Main characteristics and part numbers
| Specifications |
Standalone RT
5 kVA (3U) |
Scalable Frame (16U) | |
| Rating (kVA) / (kW) | 5 kVA / 4.5 kW | 15 kVA / 13.5 kW | 20 kVA / 18 kW |
| Inputs | |||
| Technology | on-line double conversion with power factor correction, convection cooled static bypass switch | ||
| Input connections | Terminal block with standard NEMA L6-30P, 10’ cord | Terminal Block | |
| Nominal voltage | 200/208 (default) /220/230/240/250 V | ||
| Voltage range without using battery (1) | 120 - 280 V | ||
| Input frequency range, THDI | 40-70 Hz, < 7% | ||
| Outputs | |||
| Output connections | Terminal block + (4) NEMA L6-30R | Terminal block + (8) NEMA L6-30R | |
| Output voltage and frequency, THDU, efficiency (2) | 200/208/230/240 /250 V, 50 / 60 Hz autoselect, frequency converter as standard, <2%, 97% | ||
| Transformer – 120V | |||
| Input connection | NEMA L6-30P | ||
| Output connections | (2) NEMA L5-20R (6) NEMA 5-15/20R | ||
| Backup time (3) | |||
| Pulsar MX standard backup time | 5 minutes | ||
| Pulsar MX + EXB / MX + 2 EXB / MX + 3 EXB | 22 / 41 / 62 minutes | 22 min (3 EXB)/41 min | 22 min (4 EXB)/41 min (6 EXB)/62 min (9 EXB) (8 EXB)/62 min (12 EXB) |
| Communications | |||
| Slots | (1) minislot compatible with Minislot NMC, | (2) minislot compatible with Minislot NMC, NMC ModBus/JBus, MC Contacts/Serial NMC ModBus/JBus, MC | |
| Ports | Remote Power off (RJ12), 5 output contacts (DB9), setup using Solution-Pac(4) (USB and DB9-serial ports), EXB module detection (RJ45) | ||
| Operating conditions, standards & approvals | |||
| Performance, safety, EMC, surge protection | IEC/EN 62 040-3, IEC/EN 62 040-1-1, IEC/EN 62 040-2 class A , UL 1778 and CSA 22.2 | ||
| Operating temperature, noise, approvals | 0°C to 40°C continuous, 45 dbA (5), UL, cUL, TüV, GS mark, CB, C-Tick, CE, IEC 61 931 | ||
| Dimensions/Weight | |||
| Pulsar MX RT standard backup Tower configuration (WxHxD) | 17.5” x 5.14” x 27.6”/444.5mm x 130.6mm x 700mm | 17.5" x 31.3" x 29.1" / 445mm x 795mm x 738mm | |
| Rackmount | 3U x 17.5”/3U x 444.5mm | 17.5" x 27.1" x 29.1" / 445mm x 688mm x 738mm | |
| Weight | 125.7 lbs / 57 kg | 428 lbs / 194 kg | 517 lbs / 235 kg |
| Pulsar MX Transformer 5000 (WxHxD) | 17.5” x 3.5” (2U) x 25.6”/444.5mm x 88.9mm x 650mm – 84 lbs/38 kg | ||
| 1 per UPS | up to 3 | up to 4 | |
| MX EXB battery unit tower / rack (WxHxD) | "17.5” x 5.14” (3U) x 25.6”/444.5mm x 130.6mm x 650mm - 154 lbs/70 kg maximum three per power module | ||
| Warranty | Two Year (6) | ||
| Part numbers | |||
|
Pulsar MX 5000 RT Pulsar MX UPS - standard backup time |
87050 | 87415 (7) | 87420 (8) |
| Pulsar MX UPS - standard backup time with 120V Transformer (2U) | 87150 | -- | -- |
| Pulsar MX EXB RT : battery extension module (3U) | 87103 | ||
| Pulsar MX 16U Frame - Empty | -- | 87021 | |
| Caster/Floor Mount Kit for Pulsar MX Frame | -- | 87410 | |
| MX FRAME Rail Kit | -- | 87418 | |
| Pulsar MX Transformer 5000 RT with rails (2U) | 87102 | ||
| Pulsar MX Power / electronics sub-module | 87100 | ||
| Pulsar MX Battery / sub-module | 87101 | ||
| Battery Integration System | 86005 | ||
| Pulsar MX 6-foot battery cable | 68528 | ||
| MX/EX RT Rail Kit | 86002 | ||
1: At 70% load. 2: Economy mode, 91% in normal mode. 3: At 70% nominal rating with power factor 0.7 typical values after 3 charge/discharge cycles, with 3-5 year old batteries. Weekly battery test without interrupting the load (daily or monthly if required). EXB compatible with 0.8 power factor loads. 4: Solution-Pac CDROM supplied as standard. 5: 50 dbA above 5 kVA. 6: Depending on the country, see www.mgeups.com/service. 7: 87415 = 87021 (empty Pulsar MX Frame) + (3) 87100 + (3) 87101. 8: 87420 = 87021 (empty Pulsar MX Frame) + (4) 87100 + (4) 87101